13kgs, sweeping width 77cm, Container capacity 50L

Keeping large areas tidy with a broom is hard work. The KG 770 sweeper provides a great solution to this challenge. With a 50 litre bin and the ability to collect soft drink cans, cleaning up the shed or factory will take no time and less effort. The STIHL MultiClean PLUS sweeping system allows for up to 1500 m² of neatly swept surfaces wet or dry. The variable height can be easily adjusted in a matter of seconds. The brushes on each side allow the sweeping to be done hard against curbs or walls. Weighing in at just 13kg, the sweeper can be easily transported with minimal effort.

6kg, sweeping width 55cm, Container capacity 25l

The KG 550 push sweeper is the entry level push sweeper designed for the occasional user, for cleaning up smooth or uneven surfaces such as asphalt, concrete or pavers around the home, shed or carport. Lightweight and easy to manoeuvre, using the KG 550 sweeper can complete the job six times faster than using a broom. With a 25-litre easy access bin collecting and emptying is easy. The circular brushes on each side enable larger objects to be picked up, as well as allowing the sweeper to get up close to curbs and walls. Having adjustable height not only makes it easy to adjust to different surfaces, but also allows further adjustment as the roller wears low.

The Super 104 is an affordable wide-area mower with the maneuverability of a zero-turn; Features include premium Kawasaki engine, 104" cutting width, Hyper-Drive System, Grammer premium suspension seat (standard), simple, service friendly design, and hydraulic wing deck lift. The Super 104 can mow up to 84 acres in 8 hours at 17km/h and will mow where most wide-area mowers cannot.

Features

ROPS - Folding, supplied with unit

Grammer Premium Suspension Seat with operator isolation

HyperDrive Hydro System - industrial grade pumps and motors

SmoothTrak steering - responsive precise control

Kawasaki FX1000V premium commercial duty engine

0-17.7 kph (11 mph) top speed - get the job done fast

Hydraulic wing deck lift

Remote air cleaner

104" Rear discharge deck - Wide area cut

45.4 L (12 US gal) fuel capacity

26" Drive and 15" pneumatic caster tyres

Fan forced hydro oil cooler

Commercial duty, sealed deck spindles

Simple design

Specifications

• Engine: Kawasaki FX1000V
• HP: 35.0 hp (26.1kW) @ 3600 RPM engine speed
• Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
• Starter: 12-volt (see engine manufacturers specifications)
• Ignition: Electronic
• Charging System: 12-volt (see engine manufacturers specifications)
• Oil Filter: Spin-on engine oil filter / Total oil capacity 2.0 U.S. qt. (1.9 litre) w/filter
• Fuel: Unleaded fuel (see engine manufacturer's specifications)
• Fuel Capacity: 45.4 L (12 US gal)
• Fuel Filter: Replaceable, automotive-type
• Air Filter: Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance.
• Cooling: Air cooled. Flywheel fan
• Governor: Mechanical
• PTO Clutch: 250 ft lbs
• Drive System: Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 15W50 Mobil 1 synthetic motor oil. Transmission drive (oil) cooler for increased system life.
• Pumps: Two variable displacement, slipper piston pumps. Each pump powers one drive-wheel. Sauer Danfoss DDC-20
• Pump Drive: B Section V-belt drive from engine crankshaft. Large pulley and idler diameters for longer belt life.
• Hydraulic Lines: Stainless-steel, high pressure lines with Parker Seal-Lok O-Ring face-seal fittings.
• Drive Cooling: Large capacity cooler with 9" (228.6 mm) fan for extended hydraulic life.
• Drive Filter: Internal
• Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. Parker TG0360 with hot oil shuttle.
• Ground Speed - Forward: Infinitely variable 0-17.7 kph (0 - 11 mph)
• Ground Speed - Reverse: 0-12.07 kph (0-7.5 mph)
• Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
• Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
• Brakes: In Service: Hydrostatic dynamic braking. Parking: Automotive-style drum brakes. When steering levers are placed in park position, integral park brakes are automatically engaged.
• Caster Tyres: 15 x 6.0 - 6, rib tread
• Tyres - Drive: 26 x 12 - 12, turf tread
• Hydraulic Capacity: Oil - 11.36 L (3 US gal)
• Weight: 1065.9 kg (2350 lbs)
• Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabiliser wheels at rear of lawn mower. Discharge chute deflector.
• Seat: Grammer suspension seat with isolator platform.
• Construction: Mainframe is 1.5" x 3.0" x .187" (38 mm x 76.2 mm x 4.7 mm) rectangular steel tubing with internal gusset in frame bend. Drive motors mounted to 7 ga (4.5 mm) welded steel. Front caster wheels mounted with ball bearings on each wheel. Front caster forks are .5" (12.7 mm) steel.
• Hour Meter: Standard
• ROPS: Standard foldable ROPS with seatbelt.
• Seat Suspension: Standard
• Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
• Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
• Indicators: Hour meter, engine warning light.
• Height: 54.00" (1370 mm) With ROPS folded down / 71.5" (1816 mm) With ROPS up.
• Width: With wings down: 106.1" (2695 mm) With wings up at gauge wheels: 80.0" (2032 mm) With wings up at deck base: 72.5" (1842 mm)
• Width (tyre-to-tyre): 60.3" (1532 mm)
• Deck System: Rear-Discharge: 104" cut deck. Free-floating deck using five blades. Centre deck is suspended at the corners, houses three blades and includes five deck mounted adjustable anti-scalp rollers. Two wing decks house one blade each and are attached to the centre deck with pivoting mounts. Outside of wings are suspended with adjustable casters and have one adjustable anti-scalp wheel each.
• Cutting Widths: 104" Rear Discharge.
• Deck Lift: Hydraulic powered deck and wing lift. Raise and lower deck from driver's seat with simple foot-operated deck height switch. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily. Raise and lower deck wings with a hand operated switch on the instrument panel.
• Deck Construction: Welded steel. Solid 1.5" x .375" (38 mm x 9.5 mm) steel bars reinforce impact areas on trim edges. Gusset style box section reinforces front edges. Reinforcements welded onto spindle mount areas.
• Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.0" to 5.5" (25.4 mm to 139.7 mm, 6 mm increments)
• Blade(s): (5) Heavy-duty, heat treated, low-lift steel Fusion blades
1 x 23.86" x 2.50" x .203" CW cut 1 x 23.86" x 2.50" x .203" CCW cut 1 x 20.50" x 2.50" x .203" CW cut 2 x 20.50" x 2.50" x .203" CW cut
• Blade Tip Speed: 15,800 fpm
• Blade Drive: Belt drive from engine with electric clutch to centre deck spindle. Belt drive from centre deck outer spindles to each wing. Spring tension idler and large pulleys to extend belt life.
• Spindles: Ductile iron casting with steel shafts and sealed ball bearings.
• Width of Cut: 103.75" (2635 mm)
• Trim Capacity: 22.0" 558.8 mm) [left side] 22.0" 558.8 mm) [right side]
• Optional Accessories: Optional accessories available for purchase separately include:
Mulch Kits 104": HA117257 - includes wavy mulch blades. Kit Light: HA110153 Steering Lever Extension Kit: HA353961 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible. Flasher Kit: HA110469 Beacon Kit: HA110467 Gator Mulcher Blades Centre Deck Use: HP601928 x 1 & HP794230 x 2 Gator Mulcher Blades Left Deck Use: HP601929 x 1 Gator Mulcher Blades Right Deck Use: HP794867 x 1
• Please Note: Specifications subject to change without notice.

121.6 cm³ • 6.4 kW / 8.7 hp • 10.0 kg¹

Our top model for professionals. For the most demanding challenges and extreme conditions. Now available with an incredible power-to-weight ratio and new muffler. With easy clean HD2 filter and controlled-delivery oil pump. Ideal for regular use when harvesting large timber. The most powerful series-produced chainsaw in the world. Decompression valve and STIHL ElastoStart ensure an effortless chainsaw start. Tool-free fuel cap for safe and easy refuelling

Bar length 63 cm / 25"

91.1 cm³ • 5.4 kW / 7.3 hp • 7.4 kg¹

The competition chainsaw used in the STIHL TIMBERSPORTS® SERIES. Big timber saw for the toughest jobs in forestry. The M-Tronic guarantees optimum engine performance at all times; easy starting due to single start position and stop-button function. Controlled-delivery high-performance oil pump for conveying high quantities of oil; HD2 filter with very good filter effect.

Bar length 63 cm / 25"

79.2 cm³ • 5.0 kW / 6.8 hp • 6.2 kg¹

The first chainsaw with STIHL electronically controlled fuel injection. The best power-to-weight ratio on the market. Ideal for heavy timber harvesting and preparation thanks to its lightweight construction and excellent acceleration. Optimised stop claws, HD2 filter with very good filtering effect, captive nuts on the sprocket cover and tool-free filter cover, controlled-delivery, high performance oil pump for delivering high volumes of oil, tool-free caps for easy and safe filling of fuels and lubricants.

Bar length 50 cm / 20"

Bar length 63 cm / 25"

72.2 cm³ • 4.4 kW / 6.0 hp • 6.0 kg¹

The lightest high-performance saw in the 70 cm³ cubic capacity class. Extraordinarily easy to manoeuvre, with outstanding acceleration. For felling and delimbing in medium-density and high density stands. Fitted with M-Tronic as standard, controlled-delivery high-performance oil pump for delivering high volumes of oil, and HD2 filter with very good filtering effect. Captive nuts on the sprocket cover make it easy to change the chain; tool-free caps for easy and safe filling with fuels and lubricants.

Bar length 50 cm / 20"

Bar length 50 cm / 20”

59.0 cm³ • 3.5 kW / 4.8 hp, 5.6 kg¹

The MS 362 C-M is a rugged all-rounder equipped with STIHL's environmentally friendly 2-MIX engine technology for less fuel consumption, less emissions and outstanding cutting performance. In addition, the MS 362 C-M features a heavy duty (HD) air filter system with pre-separation for long filter life which equates to less downtime cleaning the filter. The MS 362 C-M is fitted with STIHL's M-TRONIC electronic engine management system which enables the saw to automatically adjust to varying fuel grades, changes in altitude and temperature and as there are no manual carburettor adjustments starting this saw is easier than ever before, simply push the start level to the on position and pull. The MS 362 C-M is now the only choice for professionals.

Bar length 45 cm / 18"

Bar length 50 cm / 20"

50.2 cm³ • 3.0 kW / 4.1 hp, 5.2 kg¹

The MS 261 C-M is a rugged all-rounder equipped with STIHL's environmentally friendly 2-MIX engine technology for less fuel consumption and less emission and outstanding cutting performance. In addition, the MS 261 features the HD2 air filter for long filter life. The new MS 261 C-M is now fitted with STIHL's M-TRONIC electronic engine management system which enables the saw to automatically adjust to varying fuel grades, changes in altitude and temperature and makes starting this saw easier than ever before, simply push the start lever to the on position and pull. The new MS 261 C-M has taken performance to a new level.

Bar length 40 cm / 16"

• Motor: Mitsubishi TLE48FD
• Displacement: 48cc
• Power: 1.8 Kw (2.4hp)
• Fuel: 50:1 ratio petrol and oil mix.
• Weight: 9kg (20lbs)
• Blades: 271mm (10 ²/₃”) length
• Maximum Cutting Depth: 75mm (3”) Eg for garden plots.
• Gear box reduction: 3:54:1 Hardened precision cut steel spiral bevel gears
• Wheel: Commercial type rubber tyred with premium sealed ball bearings
• Power Drive: Solid precision 12mm diameter shafts with 7 sealed ball bearings
  (No belts).
• Wheel height adjustment arm with wear proof rubber bushings